Neurobehavioral and molecular changes in a rodent model of ACTH-induced HPA axis dysfunction.

Hypothalamic-pituitary-adrenal (HPA) axis dysregulation is linked to the pathophysiology of depression. Although exogenous adrenocorticotropic hormone (ACTH) is associated with a depressive-like phenotype in rodents, comprehensive neurobehavioral and mechanistic evidence to support these findings are limited. Sprague-Dawley rats (male, n = 30; female, n = 10) were randomly assigned to the control (male, n = 10) or ACTH (male, n = 20; female n = 10) groups that received saline (0.1 ml, sc.) or ACTH (100 µg/day, sc.), respectively, for two weeks. Thereafter, rats in the ACTH group were subdivided to receive ACTH plus saline (ACTH_S; male, n = 10; female, n = 5; 0.2 ml, ip.) or ACTH plus imipramine (ACTH_I; male, n = 10; female, n = 5;10 mg/kg, ip.) for a further four weeks. Neurobehavioral changes were assessed using the forced swim test (FST), the sucrose preference test (SPT), and the open field test (OFT). Following termination, the brain regional mRNA expression of BDNF and CREB was determined using RT-PCR. After two-weeks, ACTH administration significantly increased immobility in the FST (p = 0.03), decreased interaction with the center of the OFT (p < 0.01), and increased sucrose consumption (p = 0.03) in male, but not female rats. ACTH administration significantly increased the expression of BDNF in the hippocampus and CREB in all brain regions in males (p < 0.05), but not in female rats. Imipramine treatment did not ameliorate these ACTH-induced neurobehavioral or molecular changes. In conclusion, ACTH administration resulted in a sex-specific onset of depressive-like symptoms and changes in brain regional expression of neurotrophic factors. These results suggest sex-specific mechanisms underlying the development of depressive-like behavior in a model of ACTH-induced HPA axis dysregulation.

Safety-Catch Linkers for Solid-Phase Peptide Synthesis.

Solid-phase peptide synthesis (SPPS) is the preferred strategy for synthesizing most peptides for research purposes and on a multi-kilogram scale. One key to the success of SPPS is the continual evolution and improvement of the original method proposed by Merrifield. Over the years, this approach has been enhanced with the introduction of new solid supports, protecting groups for amino acids, coupling reagents, and other tools. One of these improvements is the use of the so-called "safety-catch" linkers/resins. The linker is understood as the moiety that links the peptide to the solid support and protects the C-terminal carboxylic group. The "safety-catch" concept relies on linkers that are totally stable under the conditions needed for both α-amino and side-chain deprotection that, at the end of synthesis, can be made labile to one of those conditions by a simple chemical reaction (e.g., an alkylation). This unique characteristic enables the simultaneous use of two primary protecting strategies: tert-butoxycarbonyl (Boc) and fluorenylmethoxycarbonyl (Fmoc). Ultimately, at the end of synthesis, either acids (which are incompatible with Boc) or bases (which are incompatible with Fmoc) can be employed to cleave the peptide from the resin. This review focuses on the most significant "safety-catch" linkers.

2023 FDA TIDES (Peptides and Oligonucleotides) Harvest.

A total of nine TIDES (pepTIDES and oligonucleoTIDES) were approved by the FDA during 2023. The four approved oligonucleotides are indicated for various types of disorders, including amyotrophic lateral sclerosis, geographic atrophy, primary hyperoxaluria type 1, and polyneuropathy of hereditary transthyretin-mediated amyloidosis. All oligonucleotides show chemically modified structures to enhance their stability and therapeutic effectiveness as antisense or aptamer oligomers. Some of them demonstrate various types of conjugation to driving ligands. The approved peptides comprise various structures, including linear, cyclic, and lipopeptides, and have diverse applications. Interestingly, the FDA has granted its first orphan drug designation for a peptide-based drug as a highly selective chemokine antagonist. Furthermore, Rett syndrome has found its first-ever core symptoms treatment, which is also peptide-based. Here, we analyze the TIDES approved in 2023 on the basis of their chemical structure, medical target, mode of action, administration route, and common adverse effects.

The Pharmaceutical Industry in 2023: An Analysis of FDA Drug Approvals from the Perspective of Molecules.

With the COVID-19 pandemic behind us, the U.S. Food and Drug Administration (FDA) has approved 55 new drugs in 2023, a figure consistent with the number authorized in the last five years (53 per year on average). Thus, 2023 marks the second-best yearly FDA harvest after 2018 (59 approvals) in all the series. Monoclonal antibodies (mAbs) continue to be the class of drugs with the most approvals, with an exceptional 12, a number that makes it the most outstanding year for this class. As in 2022, five proteins/enzymes have been approved in 2023. However, no antibody-drug conjugates (ADCs) have been released onto the market. With respect to TIDES (peptides and oligonucleotides), 2023 has proved a spectacular year, with a total of nine approvals, corresponding to five peptides and four oligonucleotides. Natural products continue to be the best source of inspiration for drug development, with 10 new products on the market. Three drugs in this year's harvest are pegylated, which may indicate the return of pegylation as a method to increase the half-lives of drugs after the withdrawal of peginesatide from the market in 2013. Following the trends in recent years, two bispecific drugs have been authorized in 2023. As in the preceding years, fluorine and/or N-aromatic heterocycles are present in most of the drugs. Herein, the 55 new drugs approved by the FDA in 2023 are analyzed exclusively on the basis of their chemical structure. They are classified as the following: biologics (antibodies, proteins/enzymes); TIDES (peptide and oligonucleotides); combined drugs; pegylated drugs; natural products; nitrogen aromatic heterocycles; fluorine-containing molecules; and other small molecules.

N,N-Dimethyl Formamide European Restriction Demands Solvent Substitution in Research and Development.

As of December 2023, the use of common solvent N,N-dimethyl formamide (DMF) will be restricted in the European Union because of its reproductive health hazard. Industrial facilities must comply with stricter exposure limits, and researchers are recommended to find alternative solvents. Here we explain the restrictions on DMF, which disciplines are affected, and how to substitute DMF to keep research and development commercially relevant.

Morpholine, a strong contender for Fmoc removal in solid-phase peptide synthesis.

Morpholine, which scores 7.5 in terms of greenness and is not a regulated substance, could be considered a strong contender for Fmoc removal in solid-phase peptide synthesis (SPPS). Morpholine in dimethylformamide (DMF) (50%-60%) efficiently removes Fmoc in SPPS, minimizes the formation of diketopiperazine, and almost avoids the aspartimide formation. As a proof of concept, somatostatin has been synthesized using 50% morpholine in DMF with the same purity as when using 20% piperidine-DMF.

Methods and Protocols-Aims and Scope Update.

As our readers know, Methods and Protocols is a multidisciplinary peer-reviewed scientific journal that provides a forum to the publication of novel approaches in the fields of Life Sciences, Chemistry, and Biomedical Sciences and their intersection with other related scientific fields such as Physics, Earth Sciences, and Environmental Research [...].

Protocol for Facile Synthesis of Fmoc-N-Me-AA-OH Using 2-CTC Resin as Temporary and Reusable Protecting Group.

One approach to enhance the bioavailability and half-life of peptides in vivo is through N-methylation of one or more of the amino acids within the peptide sequence. However, commercially available Fmoc-N-Me-AA-OHs are limited and often expensive. In this study, a solid-phase synthesis method for Fmoc-N-Me-AA-OH was developed using a 2-chlorotrityl chloride (2-CTC) resin as a temporary protective group for the carboxylic acid strategy. Two strategies for the alkylation step were compared, employing either dimethyl sulfate or methyl iodide in the Biron-Kessler method. In this work we tested the protocol with two amino acids: Fmoc-Thr(tBu)-OH and Fmoc-ßAla-OH. The first one is an alpha amino acid, very hindered and with the amine group directly influenced by the electronic effects of the carboxy group, whereas in Fmoc-ßAla-OH, the presence of a methylene group weakens this influence due to the intervening carbon atoms. The desired amino acids, Fmoc-N-Me-Thr(tBu)-OH and Fmoc-N-Me-ßAla-OH, were synthesized by both strategies with high yield and purity.

Improving 2-Chlorotrityl Chloride (2-CTC) Resin Activation.

Used in solid-phase peptide synthesis (SPPS) for peptides with an acid termination, the 2-chlorotrityl chloride (2-CTC) resin is highly susceptible to moisture, leading to reduced resin loading and lower synthetic yields. It is therefore recommended that the resin be activated with thionyl chloride (SOCl2) before peptide assembly. Here we present an optimized procedure for resin activation that minimizes the use of SOCl2 as the activation reagent and reduces the activation time. Additionally, we demonstrate the feasibility of reusing the 2-CTC resin when following the activation protocol, achieving comparable results to the first usage of the resin. Moreover, we achieved different degrees of resin activation by varying the amount of SOCl2. For instance, the use of 2% SOCl2 in anhydrous dichloromethane (DCM) allowed up to 44% activation of the resin, thereby making it suitable for the synthesis of longer peptides. Alternatively, employing 25% SOCl2 in anhydrous DCM resulted in up to 80% activation with a reaction time of only 5 min in both cases.

A safety-catch protecting group strategy compatible with Boc-chemistry for the synthesis of peptide nucleic acids (PNAs).

Peptide Nucleic Acids (PNAs) are an intriguing class of synthetic biomolecules with great potential in medicine. Although PNAs could be considered analogs of oligonucleotides, their synthesis is more like that of peptides. In both cases, a Solid-Phase Synthesis (SPS) approach is used. Herein, the advantage using Boc as a temporal protecting group has been demonstrated to be more favored than Fmoc. In this context, a new PNA SPS strategy has been developed based on a safety-catch protecting group scheme for the exocyclic nitrogen of the side-chain bases and the linker. Sulfinyl (sulfoxide)-containing moieties are fully stable to the trifluoroacetic acid (TFA) used to remove the Boc group, but they can be reduced to the corresponding sulfide derivatives, which are labile in the presence of TFA. The efficiency of this novel synthetic strategy has been demonstrated in the synthesis of the PNA pentamer H-PNA(TATCT)-ßAla-OH.

Chemistry and Pharmacology of Fluorinated Drugs Approved by the FDA (2016-2022).

Fluorine is characterized by high electronegativity and small atomic size, which provide this molecule with the unique property of augmenting the potency, selectivity, metabolic stability, and pharmacokinetics of drugs. Fluorine (F) substitution has been extensively explored in drug research as a means of improving biological activity and enhancing chemical or metabolic stability. Selective F substitution onto a therapeutic or diagnostic drug candidate can enhance several pharmacokinetic and physicochemical properties such as metabolic stability and membrane permeation. The increased binding ability of fluorinated drug target proteins has also been reported in some cases. An emerging line of research on F substitution has been addressed by using 18F as a radiolabel tracer atom in the extremely sensitive methodology of positron emission tomography (PET) imaging. This review aims to report on the fluorinated drugs approved by the US Food and Drug Administration (FDA) from 2016 to 2022. It cites selected examples from a variety of therapeutic and diagnostic drugs. FDA-approved drugs in this period have a variety of heterocyclic cores, including pyrrole, pyrazole, imidazole, triazole, pyridine, pyridone, pyridazine, pyrazine, pyrimidine, triazine, purine, indole, benzimidazole, isoquinoline, and quinoline appended with either F-18 or F-19. Some fluorinated oligonucleotides were also authorized by the FDA between 2019 and 2022.

Synthesis of amantadine clubbed N-aryl amino thiazoles as potent urease, α-amylase & α-glucosidase inhibitors, kinetic and molecular docking studies.

A series of ten novel compounds were synthesized by incorporating a 1,3 thiazole core into amantadine and their structures were validated using different analytical and spectral methods such as FTIR, EI-MS, 1H NMR, and 13C NMR. The antibacterial and enzyme inhibitory properties of these newly synthesized compounds were evaluated. Remarkably, the compounds exhibited significant antibacterial activity against Escherichia coli and Bacillus subtilis. Additionally, the in vitro inhibitory activities of the synthesized compounds, against α-amylase, α-glucosidase, and urease were investigated. Among the tested compounds, compound 6d demonstrated potent and selective inhibition of α-amylase IC50 = 97.37 ± 1.52 µM, while acarbose was used as positive control and exhibited IC50 = 5.17 ± 0.25 µM. Compound 6d and 6e exhibited prominent inhibition against α-glucosidase IC50 = 38.73 ± 0.80 µM and 41.63 ± 0.26 µM respectively. Furthermore, compound 6d inhibited urease with exceptional efficacy IC50 = 32.76 µM, while positive control thiourea showed more prominent activity having IC50 = 1.334 µM. Molecular docking studies disclosed the binding mechanism and affinity of these new inhibitors within the binding sites of various amino acids. To investigate the association between molecular structural characteristics and inhibitory actions of synthesized derivatives, preliminary structure-activity relationship (SAR) studies were performed. These findings indicated that compounds 6a, 6c, 6d and 6e are potential candidates for hit-to-lead follow-up in the drug-discovery process for treating diabetes and hyperglycemia.

Contemporary Developments in Ferrocene Chemistry: Physical, Chemical, Biological and Industrial Aspects.

Ferrocenyl-based compounds have many applications in diverse scientific disciplines, including in polymer chemistry as redox dynamic polymers and dendrimers, in materials science as bioreceptors, and in pharmacology, biochemistry, electrochemistry, and nonlinear optics. Considering the horizon of ferrocene chemistry, we attempted to condense the neoteric advancements in the synthesis and applications of ferrocene derivatives reported in the literature from 2016 to date. This paper presents data on the progression of the synthesis of diverse classes of organic compounds having ferrocene scaffolds and recent developments in applications of ferrocene-based organometallic compounds, with a special focus on their biological, medicinal, bio-sensing, chemosensing, asymmetric catalysis, material, and industrial applications.

Antimicrobial Peptide Synergies for Fighting Infectious Diseases.

Antimicrobial peptides (AMPs) are essential elements of thehost defense system. Characterized by heterogenous structures and broad-spectrumaction, they are promising candidates for combating multidrug resistance. Thecombined use of AMPs with other antimicrobial agents provides a new arsenal ofdrugs with synergistic action, thereby overcoming the drawback of monotherapiesduring infections. AMPs kill microbes via pore formation, thus inhibitingintracellular functions. This mechanism of action by AMPs is an advantage overantibiotics as it hinders the development of drug resistance. The synergisticeffect of AMPs will allow the repurposing of conventional antimicrobials andenhance their clinical outcomes, reduce toxicity, and, most significantly,prevent the development of resistance. In this review, various synergies ofAMPs with antimicrobials and miscellaneous agents are discussed. The effect ofstructural diversity and chemical modification on AMP properties is firstaddressed and then different combinations that can lead to synergistic action,whether this combination is between AMPs and antimicrobials, or AMPs andmiscellaneous compounds, are attended. This review can serve as guidance whenredesigning and repurposing the use of AMPs in combination with other antimicrobialagents for enhanced clinical outcomes.

Serinol-Based Versatile Disulfide-Reducing Reagent.

Here, we report the synthesis of disulfide-reducing agents 2-(dibenzylamino) propane-1,3-dithiol (DPDT) and 2-(dibenzylamino)-2-methylpropane-1,3-dithiol (DMPDT) from serinol and methyl serinol, respectively. DPDT was found to show greater stability than DMPDT. Hence, the effectiveness of DPDT as a reducing agent was evaluated in both liquid and solid phases. The reducing capacity of this agent was comparable to that of DTT.

Methionine-Containing Peptides: Avoiding Secondary Reactions in the Final Global Deprotection.

The solid-phase synthesis of Met-containing peptides using a fluorenylmethoxycarbonyl (Fmoc)/tert-butyl (tBu) protection scheme is inevitably accompanied by two stubborn side reactions, namely, oxidation and S-alkylation (tert-butylation), which result in the formation of Met(O) and sulfonium salt impurities of the target peptide, respectively. These two reactions are acid-catalyzed, and they occur during the final trifluoroacetic (TFA)-based acidolytic cleavage step. Herein, we developed two new cleavage solutions that eradicate the oxidation and reduce S-alkylation. TFA-anisole-trimethylsilyl chloride (TMSCl)-Me2S-triisopropylsilane (TIS) containing 1 mg of triphenyl phosphine per mL of solution was the optimal mixture for Cys-containing peptides, while for the remaining peptides, TIS was not required. Both cleavage solutions proved to be excellent when sensitive amino acids such as Cys and Trp were involved. TMSCl did not affect either of these sensitive amino acids. Reversing the sulfonium salt to free Met-containing peptide was achieved by heating the peptide at 40 °C for 24 h using 5% acetic acid.

FDA Approvals of Biologics in 2022.

The year 2022 witnessed the control of the COVID-19 pandemic in most countries through social and hygiene measures and also vaccination campaigns. It also saw a decrease in total approvals by the U.S. Food and Drug Administration (FDA). Nevertheless, there was no fall in the Biologics class, which was boosted through the authorization of 15 novel molecules, thus maintaining the figures achieved in previous years. Indeed, the decrease in approvals was only for the category of small molecules. Monoclonal antibodies (mAbs) continued to be the drug class with the most approvals, and cancer remained the most targeted disease, followed by autoimmune conditions, as in previous years. Interestingly, the FDA gave the green light to a remarkable number of bispecific Biologics (four), the highest number in recent years. Indeed, 2022 was another year without the approval of an antimicrobial Biologic, although important advancements were made in targeting new diseases, which are discussed herein. In this work, we only analyze the Biologics authorized in 2022. Furthermore, we also consider the orphan drugs authorized. We not only apply a quantitative analysis to this year's harvest, but also compare the efficacy of the Biologics with those authorized in previous years. On the basis of their chemical structure, the Biologics addressed fall into the following classes: monoclonal antibodies; antibody-drug conjugates; and proteins/enzymes.

Tropylium Ion, an Intriguing Moiety in Organic Chemistry.

The tropylium ion is a non-benzenoid aromatic species that works as a catalyst. This chemical entity brings about a large number of organic transformations, such as hydroboration reactions, ring contraction, the trapping of enolates, oxidative functionalization, metathesis, insertion, acetalization, and trans-acetalization reactions. The tropylium ion also functions as a coupling reagent in synthetic reactions. This cation's versatility can be seen in its role in the synthesis of macrocyclic compounds and cage structures. Bearing a charge, the tropylium ion is more prone to nucleophilic/electrophilic reactions than neutral benzenoid equivalents. This ability enables it to assist in a variety of chemical reactions. The primary purpose of using tropylium ions in organic reactions is to replace transition metals in catalysis chemistry. It outperforms transition-metal catalysts in terms of its yield, moderate conditions, non-toxic byproducts, functional group tolerance, selectivity, and ease of handling. Furthermore, the tropylium ion is simple to synthesize in the laboratory. The current review incorporates the literature reported from 1950 to 2021; however, the last two decades have witnessed a phenomenal upsurge in the utilization of the tropylium ion in the facilitation of organic conversions. The importance of the tropylium ion as an environmentally safe catalyst in synthesis and a comprehensive summary of some important reactions catalyzed via tropylium cations are described.

Cysteine-Based Perfluorinated Derivatives: A Theoretical and Experimental Study.

Cysteine-based perfluoroaromatic (hexafluorobenzene (HFB) and decafluorobiphenyl (DFBP)) were synthesized and established as a chemoselective and available core to construct molecular systems ranging from small molecules to biomolecules with interesting properties. The DFBP was found more effective than HFB for the monoalkylation of decorated thiol molecules. As proof of concept of the potential application of perfluorinated derivatives as non-cleavable linkers, some antibody-perfluorinated conjugates were prepared via thiol through two different strategies, i) using thiol from reduced cystamine coupling to carboxylic acids from mAb by amide bond, and ii) using thiols from reduction of mAb disulfide bond. Conjugates cell binding analysis demonstrated that the bioconjugation does not affect the macromolecular entity. Besides, some molecular properties of synthesized compounds are evaluated through spectroscopic characterization (FTIR and 19 F NMR chemical shifts) and theoretical calculations. The comparison of calculated and experimental 19 F NMR shifts and IR wavenumbers give excellent correlations, asserting as powerful tools in structurally identifying HFB and DFBP derivatives. Moreover, molecular docking was also developed to predict cysteine-based perfluorated derivatives' affinity against topoisomerase Il and cyclooxygenase 2 (COX-2). The results suggested that mainly cysteine-based DFBP derivatives could be potential topoisomerase II α and COX-2 binders, becoming potential anticancer agents and candidates for anti-inflammatory treatment.

D- and N-Methyl Amino Acids for Modulating the Therapeutic Properties of Antimicrobial Peptides and Lipopeptides.

Here we designed and synthesized analogs of two antimicrobial peptides, namely C10:0-A2, a lipopeptide, and TA4, a cationic α-helical amphipathic peptide, and used non-proteinogenic amino acids to improve their therapeutic properties. The physicochemical properties of these analogs were analyzed, including their retention time, hydrophobicity, and critical micelle concentration, as well as their antimicrobial activity against gram-positive and gram-negative bacteria and yeast. Our results showed that substitution with D- and N-methyl amino acids could be a useful strategy to modulate the therapeutic properties of antimicrobial peptides and lipopeptides, including enhancing stability against enzymatic degradation. The study provides insights into the design and optimization of antimicrobial peptides to achieve improved stability and therapeutic efficacy. TA4(dK), C10:0-A2(6-NMeLys), and C10:0-A2(9-NMeLys) were identified as the most promising molecules for further studies.